Hours: 07–23 daily

Jeep Cherokee ECU Tuning: Stage 1 Gains by Engine

Dyno-tested Stage 1 results for every Jeep Cherokee engine we have on the bench. Pick your engine for the full page with ECUs, notes and services, or upload your file straight away.

7 engines measured
+42 hp best Stage 1 gain · 2.0D
20 ECU services

Stage 1 gains by engine

Best Stage 1 result per engine family on the power variants this model carries; the table below lists the versions matched exactly.

EngineStockHP GainTorque GainDetails
1.3 FIREFLY petrol150 hp+15 hp+36 Nm
2.0 CRD diesel140 hp+29 hp+69 Nm
2.0 MJET diesel115–175 hpfrom +27 to +42 hp+80 Nm
2.0D diesel140–170 hpfrom +30 to +42 hp+80 Nm
2.2 MJET diesel136–210 hpfrom +21 to +27 hp+71 Nm
2.2D diesel200 hp+32 hp+69 Nm
2.8 CRD diesel177–200 hpfrom +32 to +37 hp+95 Nm

Figures are dyno-tested averages and may vary with hardware condition and fuel quality.

Measured by version

Versions of this model whose ECU and stock power match a dyno row exactly: the figure is the one measured on that engine, not a family average.

VersionEngineECUStockHP GainTorque GainOrder
Jeep Cherokee diesel2.0DEDC17C69140 hp+42 hp. 182 hp · +30%+58 NmOrder file →
Jeep Cherokee diesel2.8 CRDEDC17CP27200 hp+37 hp. 237 hp · +19%+84 NmOrder file →
Jeep Cherokee dieselEDC16C2163 hp+34 hp 197 hp · +21%+100 NmOrder file →
Jeep Cherokee diesel2.8 CRDEDC16CP31177 hp+32 hp. 209 hp · +18%+95 NmOrder file →
Jeep Cherokee dieselEDC15C2150 hp+30 hp 180 hp · +20%+75 NmOrder file →
Jeep Cherokee diesel2.0 CRDEDC17C49170 hp+30 hp. 200 hp · +18%+80 NmOrder file →
Jeep Cherokee diesel2.0 CRDEDC17C49140 hp+29 hp. 169 hp · +21%+69 NmOrder file →
Jeep Cherokee dieselEDC15C2143 hp+27 hp 170 hp · +19%+57 NmOrder file →
Jeep Cherokee diesel2.2DEDC17C69185 hp+27 hp. 212 hp · +15%n/aOrder file →
Jeep Cherokee diesel2.2DEDC17C69210 hp+21 hp. 231 hp · +10%+71 NmOrder file →
Jeep CherokeeGPEC2284 hp+16 hp 300 hp · +6%+13 NmOrder file →
Jeep CherokeeNGC5286 hp+15 hp 301 hp · +5%+17 NmOrder file →
Jeep CherokeeNGC4211 hp+7 hp 218 hp · +3%+10 NmOrder file →

12 more versions of the Jeep Cherokee are in our catalogue: we read their ECU and remap them, the dyno figure is not published yet. Upload your file. Order file →

Measured here, tunable everywhere

The Jeep Cherokee engines listed above are the ones we have run on the dyno, so the figures on their pages are readings rather than software estimates. They are not the limit of what we tune: every ECU, engine and model we can read can be remapped for power, Jeep Cherokee or otherwise. If your engine is not on this list, upload the original file anyway.

Every figure here was measured on this engine at a stock power your car has, sometimes on another car fitted with the same unit; the per-version table below marks only the exact matches.

Tune your file →

ECU services available on Jeep Cherokee

Solutions supported on the ECUs fitted to this model. Each engine page lists exactly which ones apply to its control units.

Frequently Asked Questions

Which Jeep Cherokee engines can be remapped?

The 7 engines in the table above were measured on our dyno: 1.3 FIREFLY, 2.0 CRD, 2.0 MJET, 2.0D, 2.2 MJET, 2.2D and 2.8 CRD. Other Jeep Cherokee engines can be remapped too when we can read the ECU - the table is what we publish, not the limit of the service.

How much power does a Stage 1 add on a Jeep Cherokee?

Between +7 and +42 hp depending on the engine; the best result measured is +42 hp on the 2.0D. Every figure is a dyno reading on stock hardware, not an estimate.

Do I have to send the Jeep Cherokee ECU?

No. Read the original file with your tool (KESS3, Autotuner, CMD, Dimsport, PCMTuner and others), upload it, and the tuned file comes back in 15-20 minutes to write into the car. Only the file travels.

Order your Jeep Cherokee tuning file

Upload your original ECU file and receive a professional calibration in 15-20 minutes.

Tune Your File →

v4.31.23