Hours: 07–23 daily
EN
Tune your file

TuningBot DTC Database · v4.37.15

U3526 High Voltage System Interlock Circuit G Performance

Generic (OBD-II) interpretation in the TuningBot DTC database.

U · NetworkNetworkOBD2

What U3526 means

U3526
High Voltage System Interlock Circuit G Performance Generic · network Data confidence 65%

The control module judged the High Voltage System Interlock Circuit G behaviour implausible for the current operating conditions.

Symptoms

  • Multiple warning lamps possible
  • Functions of the affected module unavailable

Possible causes

  • CAN bus wiring fault (open, short, chafed harness)
  • Faulty control module loading the bus
  • Connector or terminal corrosion
  • Power supply or ground fault of a module

Recommended checks

  • Perform a full-module scan to map which modules communicate
  • Check CAN bus resistance and voltages at the diagnostic connector
  • Inspect wiring and connectors of the affected module
  • Check module power supply and grounds
  • Disconnect suspect modules one at a time only with a documented procedure

Related and nearby codes

U35 range
U3500U3501U3502U3503U3504U3505U3506U3507U3508U3509U350AU350BU350CU350DU350EU350FU3510U3511

How to read U3526

U

Network: communication between control units.

3

Generic SAE-standard code: same meaning on every make.

526

Specific fault index within the subsystem.

Frequently asked questions about U3526

What does U3526 mean?

High Voltage System Interlock Circuit G Performance. The control module judged the High Voltage System Interlock Circuit G behaviour implausible for the current operating conditions.

Is U3526 generic or manufacturer-specific?

U3526 is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.

Can TuningBot remove U3526 at file level?

Not guaranteed. Powertrain (P) codes can be reliably disabled in the ECU calibration, but body, chassis and network codes depend on the specific control unit and how the fault is implemented - some can be handled, some cannot. Ask for a quote and our engineers will check your file and tell you, free of charge, whether U3526 is removable in your case.

Other file services

Stage 1/2/3 TuningDPF RemovalEGR RemovalAdBlue / SCR RemovalDTC RemovalIMMO OFFSpeed Limiter (Vmax)

Understand the system behind this code: Diagnostic Strategy and DTC Logic

ECU tuningDyno-tested results by model and engine See the results →

← Search the full DTC database