Generic (OBD-II) interpretation in the TuningBot DTC database.
U · NetworkNetworkOBD2
What U3025 means
U3025
Control Module A Disable Circuit/Open
Generic · network
Data confidence65%
The control module detected an interruption (open circuit) in the Control Module A Disable circuit, so the expected electrical continuity was not present.
Symptoms
Multiple warning lamps possible
Functions of the affected module unavailable
Possible causes
CAN bus wiring fault (open, short, chafed harness)
Faulty control module loading the bus
Connector or terminal corrosion
Power supply or ground fault of a module
Recommended checks
Perform a full-module scan to map which modules communicate
Check CAN bus resistance and voltages at the diagnostic connector
Inspect wiring and connectors of the affected module
Check module power supply and grounds
Disconnect suspect modules one at a time only with a documented procedure
Generic SAE-standard code: same meaning on every make.
025
Specific fault index within the subsystem.
Frequently asked questions about U3025
What does U3025 mean?
Control Module A Disable Circuit/Open. The control module detected an interruption (open circuit) in the Control Module A Disable circuit, so the expected electrical continuity was not present.
Is U3025 generic or manufacturer-specific?
U3025 is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.
Can TuningBot remove U3025 at file level?
Not guaranteed. Powertrain (P) codes can be reliably disabled in the ECU calibration, but body, chassis and network codes depend on the specific control unit and how the fault is implemented - some can be handled, some cannot. Ask for a quote and our engineers will check your file and tell you, free of charge, whether U3025 is removable in your case.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU