U061FLost Communication With Exhaust Gas Temperature Sensor Bank 1 Sensor 1
Generic (OBD-II) interpretation in the TuningBot DTC database.
U · NetworkNetworkOBD2
What U061F means
U061F
Lost Communication With Exhaust Gas Temperature Sensor Bank 1 Sensor 1
Generic · network
Data confidence65%
The control module stopped receiving expected network messages from the Exhaust Gas Temperature Sensor Bank 1 Sensor 1 node on the vehicle communication bus.
Symptoms
Multiple warning lamps possible
Functions of the affected module unavailable
Possible causes
CAN bus wiring fault (open, short, chafed harness)
Faulty control module loading the bus
Connector or terminal corrosion
Power supply or ground fault of a module
Recommended checks
Perform a full-module scan to map which modules communicate
Check CAN bus resistance and voltages at the diagnostic connector
Inspect wiring and connectors of the affected module
Check module power supply and grounds
Disconnect suspect modules one at a time only with a documented procedure
Generic SAE-standard code: same meaning on every make.
61F
Specific fault index within the subsystem.
Frequently asked questions about U061F
What does U061F mean?
Lost Communication With Exhaust Gas Temperature Sensor Bank 1 Sensor 1. The control module stopped receiving expected network messages from the Exhaust Gas Temperature Sensor Bank 1 Sensor 1 node on the vehicle communication bus.
Is U061F generic or manufacturer-specific?
U061F is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.
Can TuningBot remove U061F at file level?
Not guaranteed. Powertrain (P) codes can be reliably disabled in the ECU calibration, but body, chassis and network codes depend on the specific control unit and how the fault is implemented - some can be handled, some cannot. Ask for a quote and our engineers will check your file and tell you, free of charge, whether U061F is removable in your case.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU