Hours: 07–23 daily
EN
Tune your file

TuningBot DTC Database · v4.37.15

U05B3 Invalid Data Received From Comfort and Convenience Display B

Generic (OBD-II) interpretation in the TuningBot DTC database.

U · NetworkNetworkOBD2

What U05B3 means

U05B3
Invalid Data Received From Comfort and Convenience Display B Generic · network Data confidence 65%

The control module registered the fault condition described as "Invalid Data Received From Comfort and Convenience Display B".

Symptoms

  • Multiple warning lamps possible
  • Functions of the affected module unavailable

Possible causes

  • CAN bus wiring fault (open, short, chafed harness)
  • Faulty control module loading the bus
  • Connector or terminal corrosion
  • Power supply or ground fault of a module

Recommended checks

  • Perform a full-module scan to map which modules communicate
  • Check CAN bus resistance and voltages at the diagnostic connector
  • Inspect wiring and connectors of the affected module
  • Check module power supply and grounds
  • Disconnect suspect modules one at a time only with a documented procedure

Related and nearby codes

U05 range
U0501U0502U0503U0504U0505U0506U0507U0508U0509U050AU050BU050CU050DU050EU0511U0512U0513U0514

How to read U05B3

U

Network: communication between control units.

0

Generic SAE-standard code: same meaning on every make.

5B3

Specific fault index within the subsystem.

Frequently asked questions about U05B3

What does U05B3 mean?

Invalid Data Received From Comfort and Convenience Display B. The control module registered the fault condition described as "Invalid Data Received From Comfort and Convenience Display B".

Is U05B3 generic or manufacturer-specific?

U05B3 is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.

Can TuningBot remove U05B3 at file level?

Not guaranteed. Powertrain (P) codes can be reliably disabled in the ECU calibration, but body, chassis and network codes depend on the specific control unit and how the fault is implemented - some can be handled, some cannot. Ask for a quote and our engineers will check your file and tell you, free of charge, whether U05B3 is removable in your case.

Other file services

Stage 1/2/3 TuningDPF RemovalEGR RemovalAdBlue / SCR RemovalDTC RemovalIMMO OFFSpeed Limiter (Vmax)

Understand the system behind this code: Diagnostic Strategy and DTC Logic

ECU tuningDyno-tested results by model and engine See the results →

← Search the full DTC database