Hours: 07–23 daily

TuningBot DTC Database · v4.37.15

U0285 Lost Communication With Active Grille Air Shutter Module B

Generic (OBD-II) interpretation + 1 manufacturer-specific in the TuningBot DTC database.

U · NetworkNetworkOBD2
Brand pages:Ford

Generic (OBD-II) interpretation

U0285
Lost Communication With Active Grille Air Shutter Module B Generic · network Data confidence 65%

The control module stopped receiving expected network messages from the Active Grille Air Shutter Module B node on the vehicle communication bus.

Symptoms

  • Multiple warning lamps possible
  • Functions of the affected module unavailable

Possible causes

  • CAN bus wiring fault (open, short, chafed harness)
  • Faulty control module loading the bus
  • Connector or terminal corrosion
  • Power supply or ground fault of a module

Recommended checks

  • Perform a full-module scan to map which modules communicate
  • Check CAN bus resistance and voltages at the diagnostic connector
  • Inspect wiring and connectors of the affected module
  • Check module power supply and grounds
  • Disconnect suspect modules one at a time only with a documented procedure

Manufacturer-specific interpretations

Ford

1 interpretation
U0285:00
Loss Communication with Active Grille Air Shutter Module “B” Ford · network Data confidence 94%

Ford documents U0285:00 (no sub type information) for its 2024-2025 gasoline-engine OBD monitor strategy as loss communication with active grille air shutter module “b”. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Recommended checks

  • Perform a full module scan
  • Verify battery voltage
  • Check module power supplies and grounds
  • Inspect network wiring and connectors
  • Measure network resistance with power isolated
  • Check applicable OEM service information
Applies to Ford gasoline-engine OBD applications|2024-2025 model years

Related and nearby codes

How to read U0285

U

Network: communication between control units.

0

Generic SAE-standard code: same meaning on every make.

285

Specific fault index within the subsystem.

Frequently asked questions about U0285

What does U0285 mean?

Lost Communication With Active Grille Air Shutter Module B. The control module stopped receiving expected network messages from the Active Grille Air Shutter Module B node on the vehicle communication bus.

Is U0285 generic or manufacturer-specific?

U0285 exists both as a generic OBD-II code (same meaning on every make) and with 1 manufacturer-specific interpretation(s): Ford. Always read it in the context of your vehicle.

Can TuningBot remove U0285 at file level?

Not guaranteed. Powertrain (P) codes can be reliably disabled in the ECU calibration, but body, chassis and network codes depend on the specific control unit and how the fault is implemented - some can be handled, some cannot. Ask for a quote and our engineers will check your file and tell you, free of charge, whether U0285 is removable in your case.

Other file services

ECU tuningStage 1 dyno results for Ford engines See the results →

← Search the full DTC database