U0018Controller area network (CAN) data bus: medium speed bus ( - ) - shorted to data bus(+)
Generic (OBD-II) interpretation in the TuningBot DTC database.
U · NetworkNetworkOBD2
What U0018 means
U0018
Controller area network (CAN) data bus: medium speed bus ( - ) - shorted to data bus(+)
Generic · network
Data confidence78%
The control module detected a fault associated with the Controller area network (CAN) data bus: medium speed bus ( - ) - shorted to data bus(+) circuit or function; the stored code identifies the affected component rather than a single failure mode.
Symptoms
Multiple systems may log communication codes
Possible loss of gauge or system functions
Possible causes
Bus wiring open or short circuit
Terminating resistor fault
A faulty node disturbing the bus
Connector corrosion
Recommended checks
Measure CAN-H/CAN-L voltages and bus resistance
Map communicating vs silent modules with a full scan
Generic SAE-standard code: same meaning on every make.
018
Specific fault index within the subsystem.
Frequently asked questions about U0018
What does U0018 mean?
Controller area network (CAN) data bus: medium speed bus ( - ) - shorted to data bus(+). The control module detected a fault associated with the Controller area network (CAN) data bus: medium speed bus ( - ) - shorted to data bus(+) circuit or function; the stored code identifies the affected component rather than a single failure mode.
Is U0018 generic or manufacturer-specific?
U0018 is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.
Can TuningBot remove U0018 at file level?
Not guaranteed. Powertrain (P) codes can be reliably disabled in the ECU calibration, but body, chassis and network codes depend on the specific control unit and how the fault is implemented - some can be handled, some cannot. Ask for a quote and our engineers will check your file and tell you, free of charge, whether U0018 is removable in your case.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU