Hours: 07–23 daily

TuningBot DTC Database · v4.37.15

P3041 Powertrain Databus: Implausible Engine Temp. Message from Inst. Panel

1 manufacturer-specific interpretation across 1 manufacturer in the TuningBot DTC database.

P · PowertrainEngineOBD2
Brand pages:VAG

VAG

1 interpretation
P3041
Powertrain Databus: Implausible Engine Temp. Message from Inst. Panel VAG · engine Data confidence 80%

The control module detected a fault associated with the Powertrain Databus: Implausible Engine Temp. Message from Inst. Panel circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 19497. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Symptoms

Malfunction Indicator Light (MIL) ON

Possible causes

  • Faulty Coolant Temp Sensor
  • Wiring and/or Connector(s) from Instrument Cluster to Engine Control Module (ECM) faulty
  • Wiring and/or Connector(s) from Coolant Temp Sensor (G62)

Recommended checks

  • Check / Replace Engine Coolant Temperature Sensor (G62)
  • Check wiring and connections
Applies to Volkswagen

Related and nearby codes

How to read P3041

P

Powertrain: engine, transmission and driveline systems.

3

Manufacturer-defined range: the meaning can differ between brands.

041

Specific fault index within the subsystem.

Frequently asked questions about P3041

What does P3041 mean?

Powertrain Databus: Implausible Engine Temp. Message from Inst. Panel. The control module detected a fault associated with the Powertrain Databus: Implausible Engine Temp. Message from Inst. Panel circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 19497. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Is P3041 generic or manufacturer-specific?

P3041 is a manufacturer-specific code. In this database it is documented for: VAG. The same number can mean something different on other brands.

Can TuningBot remove P3041 at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

ECU tuningStage 1 dyno results for VAG engines See the results →

← Search the full DTC database