ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
P2C4A
Clutch Actuator Position Sensor Circuit
Generic · transmission
Data confidence
65%
The control module detected improper operation of the Clutch Actuator Position circuit.
TuningBot DTC Database · v4.37.15
P2C4A Diagnostic Trouble Code (3 variants)
Generic (OBD-II) interpretation + 1 manufacturer-specific in the TuningBot DTC database.
P · PowertrainTransmissionOBD2
Brand pages:
Ford
FordGeneric (OBD-II) interpretation
Manufacturer-specific interpretations
Ford
3 interpretations
P2C4A:11
Clutch actuation position sensor A circuit low
Ford · transmission
Data confidence
94%
Ford documents P2C4A:11 (circuit short to ground) for its 2024-2025 gasoline-engine OBD monitor strategy as clutch actuation position sensor a circuit low. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Recommended checks
- Perform a full module scan
- Review freeze-frame and occurrence data
- Inspect relevant wiring and connectors
- Check power supplies and grounds
- Compare commanded and measured values
- Check applicable OEM service information
Applies to
Ford gasoline-engine OBD applications|2024-2025 model years
P2C4A:12
Clutch actuation position sensor A circuit high
Ford · transmission
Data confidence
94%
Ford documents P2C4A:12 (circuit short to battery) for its 2024-2025 gasoline-engine OBD monitor strategy as clutch actuation position sensor a circuit high. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Recommended checks
- Perform a full module scan
- Review freeze-frame and occurrence data
- Inspect relevant wiring and connectors
- Check power supplies and grounds
- Compare commanded and measured values
- Check applicable OEM service information
Applies to
Ford gasoline-engine OBD applications|2024-2025 model years
P2C4A:48
Internal Control Module Clutch Actuation Position Performance
Ford · software
Data confidence
94%
Ford documents P2C4A:48 for its 2024-2025 gasoline-engine OBD monitor strategy as internal control module clutch actuation position performance. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Recommended checks
- Perform a full module scan
- Review freeze-frame and occurrence data
- Check applicable OEM service information
Applies to
Ford gasoline-engine OBD applications|2024-2025 model years
Related and nearby codes
How to read P2C4A
P
Powertrain: engine, transmission and driveline systems.
2
Generic SAE-standard code: same meaning on every make.
C4A
Specific fault index within the subsystem.
Frequently asked questions about P2C4A
What does P2C4A mean?
Diagnostic Trouble Code (3 variants). The control module detected improper operation of the Clutch Actuator Position circuit.
Is P2C4A generic or manufacturer-specific?
P2C4A exists both as a generic OBD-II code (same meaning on every make) and with 1 manufacturer-specific interpretation(s): Ford. Always read it in the context of your vehicle.
Can TuningBot remove P2C4A at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
Other file services
Understand the system behind this code: Diagnostic Strategy and DTC Logic