Generic (OBD-II) interpretation in the TuningBot DTC database.
P · PowertrainEmissionsOBD2
What P2388 means
P2388
EGR Sensor E Circuit Range/Performance
Generic · emissions
Data confidence65%
The control module judged the EGR Sensor E signal implausible: it stayed inside electrical limits but did not match the value expected for the current operating conditions.
Symptoms
MIL illuminated
Possible reduced engine performance
Possible rough idle or hesitation
Possible causes
Carbon-blocked EGR passages
Sticking or slow EGR valve
EGR actuator or position sensor fault
Wiring or connector fault
Vacuum supply fault (vacuum-operated systems)
Recommended checks
Read freeze frame data and full module scan
Check battery voltage and sensor supply
Inspect EGR wiring and connectors
Compare commanded vs actual EGR position/flow with live data
Inspect EGR valve and passages for carbon build-up
Powertrain: engine, transmission and driveline systems.
2
Generic SAE-standard code: same meaning on every make.
388
Specific fault index within the subsystem.
Frequently asked questions about P2388
What does P2388 mean?
EGR Sensor E Circuit Range/Performance. The control module judged the EGR Sensor E signal implausible: it stayed inside electrical limits but did not match the value expected for the current operating conditions.
Is P2388 generic or manufacturer-specific?
P2388 is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.
Can TuningBot remove P2388 at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU