Hours: 07–23 daily
EN
Tune your file

TuningBot DTC Database · v4.37.15

P2380 Diagnostic Trouble Code (2 variants)

Generic (OBD-II) interpretation + 1 manufacturer-specific in the TuningBot DTC database.

P · PowertrainEmissionsOBD2
Brand pages:Ford

Generic (OBD-II) interpretation

P2380
EGR Sensor D Circuit Generic · emissions Data confidence 65%

The control module detected improper operation of the EGR Sensor D circuit.

Symptoms

  • MIL illuminated
  • Possible reduced engine performance
  • Possible rough idle or hesitation

Possible causes

  • Carbon-blocked EGR passages
  • Sticking or slow EGR valve
  • EGR actuator or position sensor fault
  • Wiring or connector fault
  • Vacuum supply fault (vacuum-operated systems)

Recommended checks

  • Read freeze frame data and full module scan
  • Check battery voltage and sensor supply
  • Inspect EGR wiring and connectors
  • Compare commanded vs actual EGR position/flow with live data
  • Inspect EGR valve and passages for carbon build-up
  • Check related vacuum lines where fitted

Manufacturer-specific interpretations

Ford

2 interpretations
P2380:01
EGR Sensor "D" Circuit Ford · emissions Data confidence 94%

Ford documents P2380:01 for its 2024-2025 gasoline-engine OBD monitor strategy as egr sensor "d" circuit. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Recommended checks

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Applies to Ford gasoline-engine OBD applications|2024-2025 model years
P2380:92
EGR Sensor "D" Hoses Reversed Ford · emissions Data confidence 94%

Ford documents P2380:92 for its 2024-2025 gasoline-engine OBD monitor strategy as egr sensor "d" hoses reversed. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Recommended checks

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Applies to Ford gasoline-engine OBD applications|2024-2025 model years

Related and nearby codes

Related codes
P2383
P23 range
P2300P2301P2302P2303P2304P2305P2306P2307P2308P2309P230AP230BP230CP230DP230EP230FP2310P2311

How to read P2380

P

Powertrain: engine, transmission and driveline systems.

2

Generic SAE-standard code: same meaning on every make.

380

Specific fault index within the subsystem.

Frequently asked questions about P2380

What does P2380 mean?

Diagnostic Trouble Code (2 variants). The control module detected improper operation of the EGR Sensor D circuit.

Is P2380 generic or manufacturer-specific?

P2380 exists both as a generic OBD-II code (same meaning on every make) and with 1 manufacturer-specific interpretation(s): Ford. Always read it in the context of your vehicle.

Can TuningBot remove P2380 at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

Stage 1/2/3 TuningDPF RemovalEGR RemovalAdBlue / SCR RemovalDTC RemovalIMMO OFFSpeed Limiter (Vmax)

Understand the system behind this code: EGR System

ECU tuningStage 1 dyno results for Ford engines See the results →

← Search the full DTC database