P22BFO2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 2
Generic (OBD-II) interpretation in the TuningBot DTC database.
P · PowertrainEmissionsOBD2
What P22BF means
P22BF
O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 2
Generic · emissions
Data confidence65%
The control module detected an interruption (open circuit) in the O2 Sensor Negative Current Control circuit, so the expected electrical continuity was not present.
Symptoms
MIL illuminated
Possible increased fuel consumption
Possible unstable idle
Possible causes
Aged or contaminated oxygen sensor
Sensor heater circuit fault
Wiring or connector fault
Exhaust leak near the sensor
Mixture fault upstream of the sensor
Recommended checks
Read live sensor voltage/current and heater status
Inspect wiring and connectors
Check for exhaust leaks near the sensor
Check fuel trim values for upstream mixture faults
Powertrain: engine, transmission and driveline systems.
2
Generic SAE-standard code: same meaning on every make.
2BF
Specific fault index within the subsystem.
Frequently asked questions about P22BF
What does P22BF mean?
O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 2. The control module detected an interruption (open circuit) in the O2 Sensor Negative Current Control circuit, so the expected electrical continuity was not present.
Is P22BF generic or manufacturer-specific?
P22BF is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.
Can TuningBot remove P22BF at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU