Generic (OBD-II) interpretation in the TuningBot DTC database.
P · PowertrainEmissionsOBD2
What P229E means
P229E
NOx Sensor Circuit Bank 1 Sensor 2
Generic · emissions
Data confidence65%
The control module detected a fault associated with the NOx Sensor Circuit Bank 1 Sensor 2 circuit or function; the stored code identifies the affected component rather than a single failure mode.
Symptoms
MIL or SCR/AdBlue warning illuminated
Possible start-count-down or torque limitation on some applications
Possible causes
Reductant quality or level fault
Dosing valve or supply module fault
NOx sensor fault
Frozen or crystallized reductant lines
Wiring or connector fault
Recommended checks
Read NOx sensor values and dosing system status
Check reductant level and quality data
Inspect dosing valve, lines and heater operation
Check wiring and connectors of the SCR components
Check for OEM technical bulletins and software updates
Powertrain: engine, transmission and driveline systems.
2
Generic SAE-standard code: same meaning on every make.
29E
Specific fault index within the subsystem.
Frequently asked questions about P229E
What does P229E mean?
NOx Sensor Circuit Bank 1 Sensor 2. The control module detected a fault associated with the NOx Sensor Circuit Bank 1 Sensor 2 circuit or function; the stored code identifies the affected component rather than a single failure mode.
Is P229E generic or manufacturer-specific?
P229E is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.
Can TuningBot remove P229E at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU