Hours: 07–23 daily
EN
Tune your file

TuningBot DTC Database · v4.37.15

P229A Fuel Pressure Regulator 2 Exceeded Control Limits - Pressure Too Low

Generic (OBD-II) interpretation in the TuningBot DTC database.

P · PowertrainFuelOBD2

What P229A means

P229A
Fuel Pressure Regulator 2 Exceeded Control Limits - Pressure Too Low Generic · fuel Data confidence 85%

The control module detected that the monitored Fuel Pressure Regulator 2 value exceeded the calibrated threshold.

Symptoms

  • Possible hard starting or long cranking
  • Possible reduced power or cutting out
  • MIL illuminated

Possible causes

  • Low-pressure fuel supply fault (pump, filter, lines)
  • High-pressure pump wear or fault
  • Pressure regulator / volume control valve fault
  • Fuel pressure sensor fault
  • Internal leakage (injector return flow too high)

Recommended checks

  • Read specified vs actual rail pressure at cranking, idle and load
  • Check low-pressure supply (pressure/volume) first
  • Check control valve/regulator operation
  • Measure injector return flow where applicable
  • Inspect wiring and connectors of pressure components

Related and nearby codes

P22 range
P2200P2201P2202P2203P2204P2205P2206P2207P2208P2209P220AP220BP220CP220DP220EP220FP2210P2211

How to read P229A

P

Powertrain: engine, transmission and driveline systems.

2

Generic SAE-standard code: same meaning on every make.

29A

Specific fault index within the subsystem.

Frequently asked questions about P229A

What does P229A mean?

Fuel Pressure Regulator 2 Exceeded Control Limits - Pressure Too Low. The control module detected that the monitored Fuel Pressure Regulator 2 value exceeded the calibrated threshold.

Is P229A generic or manufacturer-specific?

P229A is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.

Can TuningBot remove P229A at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

Stage 1/2/3 TuningDPF RemovalEGR RemovalAdBlue / SCR RemovalDTC RemovalIMMO OFFSpeed Limiter (Vmax)

Understand the system behind this code: Diagnostic Strategy and DTC Logic

ECU tuningDyno-tested results by model and engine See the results →

← Search the full DTC database