The control module detected an interruption (open circuit) in the Engine Mount "B" Control circuit, so the expected electrical continuity was not present.
TuningBot DTC Database · v4.37.14
P0AB6 Diagnostic Trouble Code (3 variants)
Generic (OBD-II) interpretation + 1 manufacturer-specific in the TuningBot DTC database.
Generic (OBD-II) interpretation
Manufacturer-specific interpretations
Ford
3 interpretationsFord documents P0AB6:11 (circuit short to ground) for its 2024-2025 gasoline-engine OBD monitor strategy as engine mount control "b" circuit low. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Recommended checks
- Perform a full module scan
- Review freeze-frame and occurrence data
- Inspect relevant wiring and connectors
- Check power supplies and grounds
- Compare commanded and measured values
- Check applicable OEM service information
Ford documents P0AB6:12 (circuit short to battery) for its 2024-2025 gasoline-engine OBD monitor strategy as engine mount control "b" circuit high. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Recommended checks
- Perform a full module scan
- Review freeze-frame and occurrence data
- Inspect relevant wiring and connectors
- Check power supplies and grounds
- Compare commanded and measured values
- Check applicable OEM service information
Ford documents P0AB6:13 (circuit open) for its 2024-2025 gasoline-engine OBD monitor strategy as engine mount control "b" circuit/open. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Recommended checks
- Perform a full module scan
- Review freeze-frame and occurrence data
- Inspect relevant wiring and connectors
- Check power supplies and grounds
- Compare commanded and measured values
- Check applicable OEM service information
Related and nearby codes
How to read P0AB6
Powertrain: engine, transmission and driveline systems.
Generic SAE-standard code: same meaning on every make.
Specific fault index within the subsystem.
Frequently asked questions about P0AB6
What does P0AB6 mean?
Diagnostic Trouble Code (3 variants). The control module detected an interruption (open circuit) in the Engine Mount "B" Control circuit, so the expected electrical continuity was not present.
Is P0AB6 generic or manufacturer-specific?
P0AB6 exists both as a generic OBD-II code (same meaning on every make) and with 1 manufacturer-specific interpretation(s): Ford. Always read it in the context of your vehicle.
Can TuningBot remove P0AB6 at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
Other file services
Understand the system behind this code: Diagnostic Strategy and DTC Logic
