Generic (OBD-II) interpretation in the TuningBot DTC database.
P · PowertrainFuelOBD2
What P02AF means
P02AF
Cylinder 6 - Fuel Trim at Min Limit
Generic · fuel
Data confidence85%
The control module detected a fault associated with the Cylinder 6 - Fuel Trim at Min Limit circuit or function; the stored code identifies the affected component rather than a single failure mode.
Symptoms
MIL illuminated
Possible rough running or misfire
Possible increased fuel consumption
Possible causes
Injector electrical or mechanical fault
Wiring or connector fault
Fuel supply fault
Air leak causing mixture deviation
Recommended checks
Read fuel trim / mixture adaptation values
Check injector circuits and compare cylinder balance
Powertrain: engine, transmission and driveline systems.
0
Generic SAE-standard code: same meaning on every make.
2AF
Specific fault index within the subsystem.
Frequently asked questions about P02AF
What does P02AF mean?
Cylinder 6 - Fuel Trim at Min Limit. The control module detected a fault associated with the Cylinder 6 - Fuel Trim at Min Limit circuit or function; the stored code identifies the affected component rather than a single failure mode.
Is P02AF generic or manufacturer-specific?
P02AF is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.
Can TuningBot remove P02AF at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU