Generic (OBD-II) interpretation in the TuningBot DTC database.
P · PowertrainFuelOBD2
What P021D means
P021D
Cylinder 10 Injection Timing
Generic · fuel
Data confidence85%
The control module detected a fault associated with the Cylinder 10 Injection Timing circuit or function; the stored code identifies the affected component rather than a single failure mode.
Symptoms
MIL illuminated
Possible rough running or misfire
Possible increased fuel consumption
Possible causes
Injector electrical or mechanical fault
Wiring or connector fault
Fuel supply fault
Air leak causing mixture deviation
Recommended checks
Read fuel trim / mixture adaptation values
Check injector circuits and compare cylinder balance
Powertrain: engine, transmission and driveline systems.
0
Generic SAE-standard code: same meaning on every make.
21D
Specific fault index within the subsystem.
Frequently asked questions about P021D
What does P021D mean?
Cylinder 10 Injection Timing. The control module detected a fault associated with the Cylinder 10 Injection Timing circuit or function; the stored code identifies the affected component rather than a single failure mode.
Is P021D generic or manufacturer-specific?
P021D is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.
Can TuningBot remove P021D at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU