P013FO2 Sensor Delayed Response - Lean to Rich Bank 1 Sensor 2
Generic (OBD-II) interpretation in the TuningBot DTC database.
P · PowertrainEmissionsOBD2
What P013F means
P013F
O2 Sensor Delayed Response - Lean to Rich Bank 1 Sensor 2
Generic · emissions
Data confidence85%
The control module detected a fault associated with the O2 Sensor Delayed Response - Lean to Rich Bank 1 Sensor 2 circuit or function; the stored code identifies the affected component rather than a single failure mode.
Symptoms
MIL illuminated
Possible increased fuel consumption
Possible unstable idle
Possible causes
Aged or contaminated oxygen sensor
Sensor heater circuit fault
Wiring or connector fault
Exhaust leak near the sensor
Mixture fault upstream of the sensor
Recommended checks
Read live sensor voltage/current and heater status
Inspect wiring and connectors
Check for exhaust leaks near the sensor
Check fuel trim values for upstream mixture faults
Powertrain: engine, transmission and driveline systems.
0
Generic SAE-standard code: same meaning on every make.
13F
Specific fault index within the subsystem.
Frequently asked questions about P013F
What does P013F mean?
O2 Sensor Delayed Response - Lean to Rich Bank 1 Sensor 2. The control module detected a fault associated with the O2 Sensor Delayed Response - Lean to Rich Bank 1 Sensor 2 circuit or function; the stored code identifies the affected component rather than a single failure mode.
Is P013F generic or manufacturer-specific?
P013F is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.
Can TuningBot remove P013F at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU