Hours: 07–23 daily
EN
Tune your file

TuningBot DTC Database · v4.37.15

P0136 Diagnostic Trouble Code (2 variants)

Generic (OBD-II) interpretation + 1 manufacturer-specific in the TuningBot DTC database.

P · PowertrainEmissionsOBD2
Brand pages:Ford

Generic (OBD-II) interpretation

P0136
O2 Sensor Circuit Malfunction (Bank 1 Sensor 2) Generic · emissions Data confidence 90%

The control module detected improper operation of the O2 Sensor circuit.

Symptoms

  • MIL illuminated
  • Possible increased fuel consumption
  • Possible unstable idle

Possible causes

  • Heating inoperative
  • wiring
  • H025
  • ECM

Recommended checks

  • Read live sensor voltage/current and heater status
  • Inspect wiring and connectors
  • Check for exhaust leaks near the sensor
  • Check fuel trim values for upstream mixture faults

Manufacturer-specific interpretations

Ford

2 interpretations
P0136:12
O2 Sensor Circuit High Voltage/Short to Battery (Bank 1 Sensor 2) Ford · emissions Data confidence 94%

Ford documents P0136:12 (circuit short to battery) for its 2024-2025 gasoline-engine OBD monitor strategy as o2 sensor circuit high voltage/short to battery (bank 1 sensor 2). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Recommended checks

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Check applicable OEM service information
Applies to Ford gasoline-engine OBD applications|2024-2025 model years
P0136:1C
HO2S12 Circuit Range/Performance (Bank 1 Sensor 2) Ford · emissions Data confidence 94%

Ford documents P0136:1C for its 2024-2025 gasoline-engine OBD monitor strategy as ho2s12 circuit range/performance (bank 1 sensor 2). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Recommended checks

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Applies to Ford gasoline-engine OBD applications|2024-2025 model years

Related and nearby codes

Related codes
P0138P2A01
P01 range
P0100P0101P0102P0103P0104P0105P0106P0107P0108P0109P010AP010BP010CP010DP010EP010FP0110P0111

How to read P0136

P

Powertrain: engine, transmission and driveline systems.

0

Generic SAE-standard code: same meaning on every make.

136

Specific fault index within the subsystem.

Frequently asked questions about P0136

What does P0136 mean?

Diagnostic Trouble Code (2 variants). The control module detected improper operation of the O2 Sensor circuit.

Is P0136 generic or manufacturer-specific?

P0136 exists both as a generic OBD-II code (same meaning on every make) and with 1 manufacturer-specific interpretation(s): Ford. Always read it in the context of your vehicle.

Can TuningBot remove P0136 at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

Stage 1/2/3 TuningDPF RemovalEGR RemovalAdBlue / SCR RemovalDTC RemovalIMMO OFFSpeed Limiter (Vmax)

Understand the system behind this code: Oxygen Sensors (Lambda)

ECU tuningStage 1 dyno results for Ford engines See the results →

← Search the full DTC database