ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
Peugeot Boxer ECU Tuning: Stage 1 Gains by Engine
Dyno-tested Stage 1 results for every Peugeot Boxer engine we have on the bench. Pick your engine for the full page with ECUs, notes and services, or upload your file straight away.
Stage 1 gains by engine
Best Stage 1 result per engine family on the power variants this model carries; the table below lists the versions matched exactly.
| Engine | Stock | HP Gain | Torque Gain | Details |
|---|---|---|---|---|
| 2.2 TDCI diesel | 100–160 hp | from +21 to +74 hp | +95 Nm | Engine page → |
| 3.0 D diesel | 150–177 hp | from +27 to +31 hp | +77 Nm | Engine page → |
| 3.0 MJET diesel | 180 hp | +26 hp | +63 Nm | Engine page → |
Figures are dyno-tested averages and may vary with hardware condition and fuel quality.
Measured by version
Versions of this model whose ECU and stock power match a dyno row exactly: the figure is the one measured on that engine, not a family average.
| Version | Engine | ECU | Stock | HP Gain | Torque Gain | Order |
|---|---|---|---|---|---|---|
| Peugeot Boxer diesel | DCM6.2C | 130 hp | +70 hp 200 hp · +54% | +85 Nm | Order file → | |
| Peugeot Boxer diesel | DCM7.1B | 140 hp | +50 hp 190 hp · +36% | +90 Nm | Order file → | |
| Peugeot Boxer diesel | SID208 | 120 hp | +48 hp. 168 hp · +40% | +74 Nm | Order file → | |
| Peugeot Boxer diesel | EDC15C7 | 128 hp | +32 hp 160 hp · +25% | +80 Nm | Order file → | |
| Peugeot Boxer diesel | EDC16C39 | 160 hp | +30 hp 190 hp · +19% | +70 Nm | Order file → | |
| Peugeot Boxer diesel | EDC17CP52 | 176 hp | +27 hp. 203 hp · +15% | +74 Nm | Order file → | |
| Peugeot Boxer diesel | EDC15C7 | 146 hp | +24 hp 170 hp · +16% | +40 Nm | Order file → |
7 more versions of the Peugeot Boxer are in our catalogue: we read their ECU and remap them, the dyno figure is not published yet. Upload your file. Order file →
Measured here, tunable everywhere
The Peugeot Boxer engines listed above are the ones we have run on the dyno, so the figures on their pages are readings rather than software estimates. They are not the limit of what we tune: every ECU, engine and model we can read can be remapped for power, Peugeot Boxer or otherwise. If your engine is not on this list, upload the original file anyway.
Every figure here was measured on this engine at a stock power your car has, sometimes on another car fitted with the same unit; the per-version table below marks only the exact matches.
Frequently Asked Questions
Which Peugeot Boxer engines can be remapped?
The 3 engines in the table above were measured on our dyno: 2.2 TDCI, 3.0 D and 3.0 MJET. Other Peugeot Boxer engines can be remapped too when we can read the ECU - the table is what we publish, not the limit of the service.
How much power does a Stage 1 add on a Peugeot Boxer?
Between +24 and +70 hp depending on the engine; the best result measured is +70 hp. Every figure is a dyno reading on stock hardware, not an estimate.
Do I have to send the Peugeot Boxer ECU?
No. Read the original file with your tool (KESS3, Autotuner, CMD, Dimsport, PCMTuner and others), upload it, and the tuned file comes back in 15-20 minutes to write into the car. Only the file travels.
Order your Peugeot Boxer tuning file
Upload your original ECU file and receive a professional calibration in 15-20 minutes.
Tune Your File →v4.31.23