Hours: 07–23 daily

Audi S6 ECU Tuning: Stage 1 Gains by Engine

Dyno-tested Stage 1 results for every Audi S6 engine we have on the bench. Pick your engine for the full page with ECUs, notes and services, or upload your file straight away.

2 engines measured
+120 hp best Stage 1 gain

Stage 1 gains by engine

Best Stage 1 result per engine family on the power variants this model carries; the table below lists the versions matched exactly.

EngineStockHP GainTorque GainDetails
3.0 TFSI petrol340–354 hpfrom +42 to +53 hp+69 Nm
4.0 TSI petrol600 hp+55 hp+97 Nm

Figures are dyno-tested averages and may vary with hardware condition and fuel quality.

Measured by version

Versions of this model whose ECU and stock power match a dyno row exactly: the figure is the one measured on that engine, not a family average.

VersionEngineECUStockHP GainTorque GainOrder
Audi S6 petrolMED17.1.1420 hp+120 hp 540 hp · +29%+250 NmOrder file →
Audi S6 petrolMED17.1.1450 hp+90 hp 540 hp · +20%+250 NmOrder file →
Audi S6 petrol4.0 TSIMG1CS008600 hp+55 hp. 655 hp · +9%+97 NmOrder file →
Audi S6 petrolME7.1265 hp+50 hp 315 hp · +19%+80 NmOrder file →
Audi S6 petrolME7.1.1340 hp+20 hp 360 hp · +6%+30 NmOrder file →
Audi S6 petrolME7.1344 hp+20 hp 364 hp · +6%+30 NmOrder file →
Audi S6 petrolMED9.1435 hp+20 hp 455 hp · +5%+25 NmOrder file →

10 more versions of the Audi S6 are in our catalogue: we read their ECU and remap them, the dyno figure is not published yet. Upload your file. Order file →

Measured here, tunable everywhere

The Audi S6 engines listed above are the ones we have run on the dyno, so the figures on their pages are readings rather than software estimates. They are not the limit of what we tune: every ECU, engine and model we can read can be remapped for power, Audi S6 or otherwise. If your engine is not on this list, upload the original file anyway.

Every figure here was measured on this engine at a stock power your car has, sometimes on another car fitted with the same unit; the per-version table below marks only the exact matches.

Tune your file →

Frequently Asked Questions

Which Audi S6 engines can be remapped?

The 2 engines in the table above were measured on our dyno: 3.0 TFSI and 4.0 TSI. Other Audi S6 engines can be remapped too when we can read the ECU - the table is what we publish, not the limit of the service.

How much power does a Stage 1 add on a Audi S6?

Between +20 and +120 hp depending on the engine; the best result measured is +120 hp. Every figure is a dyno reading on stock hardware, not an estimate.

Do I have to send the Audi S6 ECU?

No. Read the original file with your tool (KESS3, Autotuner, CMD, Dimsport, PCMTuner and others), upload it, and the tuned file comes back in 15-20 minutes to write into the car. Only the file travels.

Order your Audi S6 tuning file

Upload your original ECU file and receive a professional calibration in 15-20 minutes.

Tune Your File →

v4.31.23