ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
Audi RSQ3 ECU Tuning: Stage 1 Gains by Engine
Dyno-tested Stage 1 results for every Audi RSQ3 engine we have on the bench. Pick your engine for the full page with ECUs, notes and services, or upload your file straight away.
Stage 1 gains by engine
Best Stage 1 result per engine family on the power variants this model carries; the table below lists the versions matched exactly.
| Engine | Stock | HP Gain | Torque Gain | Details |
|---|---|---|---|---|
| 2.5 TFSI petrol | 400 hp | +42 hp | +95 Nm | Engine page → |
| 4.0 TSI petrol | 600 hp | +55 hp | +97 Nm | Engine page → |
Figures are dyno-tested averages and may vary with hardware condition and fuel quality.
Measured by version
Versions of this model whose ECU and stock power match a dyno row exactly: the figure is the one measured on that engine, not a family average.
| Version | Engine | ECU | Stock | HP Gain | Torque Gain | Order |
|---|---|---|---|---|---|---|
| Audi RSQ3 petrol | 4.0 TSI | MG1CS008 | 600 hp | +55 hp. 655 hp · +9% | +97 Nm | Order file → |
| Audi RSQ3 petrol | 2.5 TFSI | MED17.1.62 | 400 hp | +42 hp. 442 hp · +11% | +95 Nm | Order file → |
Measured here, tunable everywhere
The Audi RSQ3 engines listed above are the ones we have run on the dyno, so the figures on their pages are readings rather than software estimates. They are not the limit of what we tune: every ECU, engine and model we can read can be remapped for power, Audi RSQ3 or otherwise. If your engine is not on this list, upload the original file anyway.
Every figure here was measured on this engine at a stock power your car has, sometimes on another car fitted with the same unit; the per-version table below marks only the exact matches.
Frequently Asked Questions
Which Audi RSQ3 engines can be remapped?
The 2 engines in the table above were measured on our dyno: 2.5 TFSI and 4.0 TSI. Other Audi RSQ3 engines can be remapped too when we can read the ECU - the table is what we publish, not the limit of the service.
How much power does a Stage 1 add on a Audi RSQ3?
Between +42 and +55 hp depending on the engine; the best result measured is +55 hp on the 4.0 TSI. Every figure is a dyno reading on stock hardware, not an estimate.
Do I have to send the Audi RSQ3 ECU?
No. Read the original file with your tool (KESS3, Autotuner, CMD, Dimsport, PCMTuner and others), upload it, and the tuned file comes back in 15-20 minutes to write into the car. Only the file travels.
Order your Audi RSQ3 tuning file
Upload your original ECU file and receive a professional calibration in 15-20 minutes.
Tune Your File →v4.31.23