fbpx

FEMTO OBD Flasher

Sale!

FEMTO OBD Flasher

1.049,99 999,99

With FEMTO OBD Flasher you can easily make Virtual Read of MDG1 / EDC17 / MEVD17 / 8HP EGS Mechatronic ECU directly from OBD socket. No need to remove or disassemble ECU. All operations are easy and safe.

With FEMTO OBD Flasher you can easily make Virtual Read of MDG1 / EDC17 / MEVD17 / 8HP EGS Mechatronic ECU directly from OBD socket. No need to remove or disassemble ECU. All operations are easy and safe.

 

You will get an 4MB ORI for EDC17 / MEVD17 and 8Mb ORI full file in case of MDG1 ECU’s that you can tune to your liking: chip tuning, DPF switch off, EGR switch off, catalytic converter removal, Vmax, etc. After applying the new improvements to the ORI file – you can easily write it back by OBD.

Now you are able read and write calibrations ZF EGS 8HP.
Available for almost all 8HP models in BMW F & G series.
You will get an 2MB ORI file. After applying the new improvements to the ORI file – you can easily write it back by OBD same as DME / DDE.

No need to think about checksum calculations. Everything is done automatically. Virtual reading is available for all software variants. If we don’t have the file for your car on our server – we will add it in under 24 hours.

Supported ECU’s DDE / DME based on TC1797
• Bosch EDC17C41
• Bosch EDC17C50
• Bosch EDC17C56
• Bosch EDC17CP45
• Bosch EDC17CP49
• Bosch MEVD17.2.4
• Bosch MEVD17.2.5
• Bosch MEVD17.2.6
• Bosch MEVD17.2.9
• Bosch MEVD17.2.G
• Bosch MEVD17.2.8
• Bosch MEVD17.2.H

Supported ECU’s EGS 8HP
• GSB23TU
• GSB231
• GSZFB1

Benefits

  • FEMTO calculates all checksums inside FLASH (also known as CS);
  • CVN and CALID will be automatically corrected to match stock;
  • Dealer program ID number remains the same as original;
  • Programming counter stay not changed for TC1797 ECU’s;
  • Date of programming will not be changed;
  • Open standard .BIN file after Virtual Reading (VR);
  • Technical support 24/7.

It will be sent to your email within 1 hour after payment confirmation. If you are already a FEMTO user, then you can download latest update via your Google Drive link.

We are excited to share and invite you to join us on a project we’ve been thinking about over the last few months.
That’s a software for Bosch MDG1 (also known as BMW MD1 / MG1) ECUs family chip-tuning.

Version history

1.60.0:
[DME/DDE] added support for all BOSCH DDE / DME based on TC1797;
[DME/DDE] programming counter freeze for TC1797 ECU’s;
[EGS] Added EGS support for 8HP on F and G series;
[enet] Improved flashing time for MDG1;
[enet] Improved USB to Ethernet adapters support.

1.50.0:
[mdg1] AURIX ECU is now fully supported (M5 F90, X1, X2, MINI);
[mdg1] Read ECU added (read actual data from the ECU via OBD);
[enet] Improved USB to Ethernet adapters support;
[net] Reduced encrypted files size;
[ux] Open/Save file mask changed from “.bin” to “.encrypted” for the slave versions;
[ux] More tooltips added.

1.42.1:
[ux] Added tooltips for misused controls;
[ux] Check for femto.Runtime.dll to prevent crashes;
[ux] Usage Tips in log window;
[ux] Run as Administrator improved;
[ux] Fixed EULA form (Drowned Accept/Cancel buttons);
[net] Slightly improved data communication between car and PC.

1.42.0:
Initial release.